How to “Reset” the lift mechanism Unit will operate inconsistently when it needs to be reset. Resetting of the lift mechanism is generally required if it’s unplugged for a lengthy period of time, after a power surge, power outage and/or similar events. If your lift unit is already in the DOWN position, disregard the paragraph below, and go to step 1. If your lift unit is in the UP position, lower the unit first; as low as it go on its own.

Once it’s in the down position (as low as it goes on its own), proceed with: 1. Winavi All In One Converter Keygen Serial Numbers on this page. Pushing and holding the down button on the control box for 15 seconds does it.

Dragon Ball Gt All Episodes English Download. No more missed important software updates! Reading Programs For Kindergarten For Free. UpdateStar 11 lets you stay up to date and secure with the software on your computer.

When unit begins to lower, keep pushing the down button. When unit reaches all the way down, keep pushing the down button for additional 10 seconds. A 'click' sound will be heard when resetting takes place. After this, 'the viewing position' will have to be reset. To do so, push and hold the 'setup' and 'up' buttons on the control box for 4 seconds until the red LED light starts to blink. Then release the buttons. Push and hold the UP button on the control box until the unit reaches the desired height.

Once this is established, push the 'setup' button once to exit the mode. If this fails to resolve the issue, you may have to reset manually. For this trouble shooting procedure, please contact one of the customer service representatives. If your control box (Located on the left top corner of the lift mechanism) on the lift mechanism has 4 buttons (Up, Down, By-pass, and Setup) with a red LED light, please follow these instructions: • To program the remote control, press and hold the “Setup” and “Down” buttons on the control box for at least 3 seconds until the red LED light turns off. • Press any button on the remote control a few times. If the control box recognizes the remote control, the RED light on the control box will light once. • Press the “Setup” button once on the control box to exit the programming mode and return tonormal operation mode.

If your control box (Located on the left top corner of the lift mechanism) on the lift mechanism has 2 buttons (Green and Red) with a green LED light, please follow these instructions: • To program the remote control, press and hold the little black button on the control box that is indicated “Remote Control” for at least 5 seconds. (You may need an item with a pointy tip such as a pen or a screw driver) • A red LED light will appear if the button is pushed properly. • Release the “Remote Control” button. Then press any button on the remote control a few times. • Upon the recognition of the signal by the control box, your lift mechanism will be operating. --------------------------------------------------------------------------------------------------- If your control box (Located on the left top corner of the lift mechanism) on the lift mechanism has 3 buttons, a small digital display unit, and a blue LED light, please follow these instructions: • To program the remote control, make sure the number “2” is showing on the control unit's display, (if the number “2” is not showing, then press the “Setup” button for 3 seconds until it beeps.